Acrosser AR-B5630 - Manual (Page 29)

29
ACPI Function
Enable this function to support ACPI (Advance Configuration and Power Interface)
ACPI Suspend Type
This options for this field are S1 (POS) and S3 (STR). By default, the field is set to S1 (POS)
PWRON After PWR-Fail
The field sets the system power status whether on or off when power returns from a power failure.
Power –Supply Type
This item allows you to choose the Type of Power Supply in use.The Choice: AT, ATX.
5.4 PNP/PCI SETUP
The option configures the PCI bus system. All PCI bus system on the system use INT#, thus all
installed PCI cards must be set to this value.
PnP / PCI Setup
Reset Configuration Data
Thus field allows you to determine whether to reset the configuration data or not. The default value is
“Disabled”.
Resources Controlled By
This PnP BIOS can configure all of the boot and compatible devices automatically with the use of a use
a PnP operating system such as Windows 95.