The control pane – ASKO 12004 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turn the thermostat knob
to the required setting.
The indicator lamp will light.
A safety catch prevents the
thermostat knob from being
turned to higher temper
atures. Release it by
pushing the button beneath
the knob. This safety
device can be disconnected
— see page 9.
@ Open the door by pushing
the button with the keyhoie
symbol (door opening).
©
The Control pane!
Program
control knob
The program control
knob must be
turned clockwise only.
Thermostat knob
with main switch
The door cannot be opened
if the thermostat knob is
turned to 0.
Safety catch
Press the button to release
the safety catch so that
the thermostat knob can
be burned to higher temp
eratures (clockwise).
Altematively, the safety
catch can be disengaged
completely, as described
on page 9.
Opening the
inner door
The inner door can only be
opened when
• The thermostat knob is set to
a temperature above 20°C, and,
• The program control knob has
stopped at the 0 mark.
If the door will not open,
see above.
Press the right hand side of
the rocker switch for extra
high water level during
rinses. Press the left hand
side of the rocker switch to
return to the normal rinse
water level.
Délicates wasih
program: high water
level, only three rinses
and short spin.
0
O
1/2
The door can be opened
only when the machine has
pumped out the water in it,
i.e. the program control knob
has stopped with the mark
against the ® mark. (i£.
after 6 or 8).
If the mark is against any ^
other position, turn the ’
program control knob to 8
to pump out the machine.
After about 90 seconds, the
machine will be empty and
the knob will have moved to
the 0 position. The door
can now be opened: see
(1) above.
Higher water level
To obtain higher water level, eg. for washing a mat,
proceed as follows:
• Press the délicates Wash button.
• Allow the machine to fill to your required levei.
• Press the Délicates Wash button again and the
ordinary program will now continue
Omit spin
900
Selection of low spin speed
of 900 r/mln Is achieved
when button Is depressed.
NOTE: When button Is out
spin speed is 1300 r/mln.
Economy
Half load
program
program