Pintucking – Bernina 532-2 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pintucking
The complete pin-tucking attachment comprises the fallowing members:
3 double needles for pin-tucks of approx. Vii, Vi and
' U
inch width
3 pin-tuckers with 3, 5 and 7 grooves
1 pin-tucking tongue
KiS.
i z
1 pin-tucking yarn threader
When preparing the machine for pin-tucking,
proceed as follows:
1. Set needle to centre position in hole by ad
justing control 13 (Fig. 2) to centre,
2. Set zigzag lever 12 (Fig.21 to zero.
3. Remove standard needle from needle bar and
insert a double needle (proceed as for standard
needle).
4. Attach the pin-tucking foot corresponding to
the needle distance, namely:
pin-tucker with 7 grooves / double needle of '/i:'"
pin-tucker with 5 grooves / double needle of
pin-tucker with 3 grooves / double needle of ' d"
i»2
4
Thread tenaiiin
7
Take-Up lever
8
Thread guide
31
Spool pins
32
Thread guide
33
Thread guide
Fiir, 73