Baking, Adjusting factory set baking temperature, À warning – Amana ART6002 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oven Rack Placement
Position oven rack before turning oven on.
À WARNING
To avoid damaging oven liner or creating fire, do not line
oven bottom or oven racks with foil.
1. Pull rack forward to stop position.
2. Raise front edge of rack and pull until rack is out of
oven.
3. Place rack in new rack position,
• Curved edge of rack must be toward rear of oven.
Oven Rack Placement
Bake Pan Placement
• Keep pans and baking sheets 2 inches from oven walls.
• Stagger pans placed on different racks so one is not
directly over the other.
Pan Placement
2
.
Baking
1. Open oven door to confirm nothing is stored in oven
cavity and set racks to proper height.
To preheat oven, turn oven temperature knob to
desired temperature.
• Oven indicator light glows if knob is set to any
position but OFF.
• When oven reaches desired temperature,
PREHEATED light glows and oven beeps 6 times.
Place food in oven,
• If self-clean lever is moved to lock position while
baking, LOCKED light flashes and oven does not
heat. Move leverto unlocked position to resume
baking.
After cooking time elapses, remove food and turn
oven temperature knob to OFF.
OFF
OVEN
BROIL
WM
Temperature Knob
Adjusting Factory Set Baking Temperature
Oven temperature is set at factory. When first using oven,
follow recipe times and temperatures. If you think oven is
too hot or too cool, temperature can be adjusted. Before
adjusting oven baking temperature, test a recipe by using
a temperature set higheror lower than the recommended
temperature. The baking results should help you to decide
how much adjustment is needed.
1. Turn oven temperature knob to OFF.
2. Press and hold HRS + and HRS - pad for
approximately 5 seconds.
3. Immediately, press either HRS + or HRS - pad.
• HRS + increases oven temperature by 5°F.
• HRS - decreases oven temperature by 5°F.
• Oven temperature can be changed up to 35°F,
When temperature is adjusted cooler“-” shows in
display followed by offset temperature.
• After a few seconds control saves new setting and
returns to previous display.
16