Zapco Studio X Series - Manual (Page 14)

Strapping the Outputs of the Studio X Mono Amps
+
-
Master amp
Slave amp
2Ω Minimum Load
As Above
1. Connect the master amplifier’s speaker output
+
terminal to the
+
(positive) terminal of the woofer.
2. Connect the slave amplifier’s speaker output
+
Terminal to the
-
(negative) terminal of the woofer
3.
Connect the Connect the two amplifier’s speaker output
-
(negative)
terminals together
Note: You are creating a much more powerful amplifier in this way and dou-
bling the output. Make sure your speaker wire can transfer the power. We
recommend a minimum of 12 gauge speaker lead, and for best performance
you should use 10 gauge or 8 gauge.