VACUUBRAND MZ 2C VARIO - Manual (Page 14)

page 14 of 51
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999034 / 22/04/2008
Rear side CVC 2000 II
connection power
supply frequency
converter
mains switch
connection mains
cable
female connector to connect
trip line frequency converter
female connector to connect a coolant
valve and/or a venting valve
serial interface
RS 232 C
female connector to connect
the gauge head VSK 5
thread M8 for stand rod
(included)
Keys
• pressure setting (only vacuum control)
• adapting process pressure
• ”key p
▲” or ”key p▼”
• setting frequency
• setting time for switch-off (only VACUU•LAN)
• switching (toggling) in setups
• ”key
▲” or ”key ▼”
• start or stop of process control or
• confirmation of selected values or mode
• operating venting valve (only if valve
is connected and preselected)
• switch on/off automatic mode (only vacuum control)
• special function (in combination with another key)