Microtel Series 250 - Manual (Page 26)

OPERATIONAL
Fault detection method Normally open or closed,
selectable
Fault integration time constant One to 99 seconds
Station identification Synthesized voice,
user programmable messages
Message repetitions One to 99, user programmable
Data retention Nonvolatile EEPROM
Message retention Battery Backed DRAM, 1 MBit
Programming Local keyboard entry
SYSTEM DIAGNOSTICS
Audible indicators Line monitor
Vocal status of all data, fault conditions
and parameters
Visual indicators Fault channels
Run status
Off hook
Incoming call
Power on
Battery condition
Intercall delay in progress
Successful acknowledgment
C. SAMPLE MESSAGES
System Identification, location 0
“This is the West Side Treatment Plant, 91st and Oak”
“This is an automatic alarm from Microtel Inc.”
“This is station 51”
Fault Messages, locations 1, 2, 3, 4 and 5
“High well level”
“AC Power failure, dispatch crew at once”
“Fire Alarm, activate fire emergency plan”
“Intrusion, call the supervisor and the police”
Status Normal Message, location 6
“Status Normal”
“No fault conditions exist at this time”
Signoff Message, location 7
“Acknowledged accepted, now entering the intercall delay”
“Acknowledged detected, further calls will be delayed for the intercall delay period”
22