Parts included, Tools/items required – K-Edge K13-440 User Manual
Page 2

Parts Included:
K13-440
1x GO BIG ¼”-20 Pro Handlebar mount
1x ¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
1x Silicone O-Ring (Orange) Dash #107
1x M2.5 x 0.45 x 5mm SHCS
‘Alignment Bolt’
2x M4 x 12mm SHCS
‘Clamp Bolts’
K13-450: (Adapter Only
– GO BIG Mounts Required)
1x GO BIG
¼”-20 Adapter mount
1x
¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
1x Silicone O-Ring (Orange) Dash #107
1x M2.5 x 0.45 x 5mm SHCS
‘Alignment Bolt’
K13-460
1x GO BIG Pro Saddle Rail mount
1x
GO BIG ¼”-20 Adapter mount
1x ¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
1x Silicone O-Ring (Orange) Dash #107
1x M2.5 x 0.45 x 5mm SHCS
‘Alignment Bolt’
2x M4 x 8mm FHCS
2x M5 x 16mm FHCS
Tools/Items Required:
Metric Allen Set (3mm for clamp bolts, 4mm for mounting bolts, and 5mm for Thumbscrews)
Torque wrench
Note: (Applies to: K13-400/410/420/430/460) Prior to installation please ensure that the camera mounting bolt is installed
correctly.