K-Edge K13-505-[color] - Manual

1
GARMIN® Mount XL Installation Instructions
(K13-505-[color])
Description:
The K-EDGE GARMIN Mount XL is identical in design to the K13-500 GARMIN Mount with the exception that it has been extended
7mm to allow fitment of the GARMIN Edge® 1000 computer.
Compatibility:
The K13-505 GARMIN Mount XL is compatible with all GARMIN Edge® 200, 500, 510, 800, 810, and 1000 computers. It is also
compatible with the GARMIN Forerunner® 310XT (with 'quick-release kit' purchased separately from GARMIN) computers utilizing
the same mounting system. NOTE: The GARMIN Forerunner® 910XT requires a spacer to properly clear the K13-505, please
contact us for further information.
Warnings:
These instructions are generalized to accommodate a wide range of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-EDGE Technical Support if you have any questions.
Improper installation of any K-EDGE product or use outside of its design intentions could lead not only to damaging the bike and
related components but could also cause personal injury to the rider.
!! TETHER ATTACHMENT!! – BOTH THE GARMIN 510 AND 1000 COME SUPPLIED WITH TETHERS; HOWEVER,
THE OTHER MODELS DO NOT. IF YOU DO NOT HAVE A TETHER, ONE CAN BE PURCHASED DIRECTLY FROM GARMIN
(PART # 010-11251-16). THE ATTACHMENT OF A TETHER IS STRONGLY RECOMMENDED FOR ANY GARMIN
COMPUTER! SEE SECTION TITLED ‘TETHER INSTALLATION’ IN THESE INSTRUCTIONS.
Parts Included:
 K13-505
 1x K-EDGE GARMIN Mount XL
 2x M4 x 12 mm bolts
 2x M3 x 6 mm (Blue Thread Lock applied)
Default Insert Position
for Garmin Edge ®
Insert Position for Garmin Edge®
1000 (Landscape Mode) or
Forerunner ® 310XT and 910XT
WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!