Intek 100 - Manual (Page 17)

- 15 -
SECTION 6
!
CUSTOM INFORMATION
6.1 UNIT IDENTIFICATION
Model no.:
Serial no.:
Customer identification:
6.2 CONFIGURATION
The configuration of this unit, as originally shipped from the factory:
Input Power:
:
115 Vac, 50/60 Hz
Q 230 Vac, 50/60 Hz Q 24 Vdc
Output:
:
4-20 mA
Q 0-5 Vdc Q 0-10 Vdc
Pressure Rating: Temperature Rating:
Calibrated Range:
Wetted Material:
:
316 stainless steel
Q other
Enclosure Type:
:
NEMA 4
Q NEMA 4X Q NEMA 7 (CL I, Grp BCD) Q Other Process
Connection:
6.3
SPECIAL INSTRUCTIONS
The 0-5 Vdc signal is approximately proportional to the logarithm of flow. To linearize the output,
use this equation:
where x = Vdc
m = 0.044354
b
= 2.2268
f = 106.0852