IC Realtime 3Mp Full HD Network PTZ Dome Camera (ICIPP3020HD) - Manual (Page 17)

17
3 WALL MOUNT BRACKET INSTALLATION
3.1 Component Installation
Wall mount bracket and its components are shown as below. See Figure 3-1.
Figure 3-1
3.2 Installation
3.2.1 Installation Requirements
The wall mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments. Before the installation, please make sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 4x weight of the speed dome.
3.2.2 Installation Steps
Please draw four holes position in the wall according to the hole of the bottom of the wall mount
bracket. Then you can dig four holes and insert the expansion bolts (not provided). Use four hex
bolts and flat washer to fix the bracket in the expansion bolts. See Figure 3-2.
Figure 3-2
Install the speed dome in the bracket. See Figure 3-3.
Installation
Hole