Throttle mode "thmod, Fu n c tio n, Throttle system) – Futaba 4PK 2.4GHz User Manual
Page 79
5 : 5
7 : 3
Warning display
80
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t
he
button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he
button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
-The neutral brake function is a function switch function (page 86), and setting the neu-
tral brake function ON/OFF switch is necessary.
Neutral brake, which applies the brakes at the throttle trigger neutral position, can be set.
However, for Futaba speed controller (ESC) MC850C, MC601C, MC401CR, etc, consid-
ering safety, when the neutral position is not confirmed, the set will not enter the opera-
tion mode to prevent the motor from rotating instantly when the power was turned on.
When using the MC850C, MC601C, MC401CR, etc., check that the ESC is in the neutral
position and set the neutral brake function switch to ON after the set enters the operation
mode.
An LED blinks while the neutral brake function is active (when LED is enabled). In
addition,
appears on the initial screen and menu screen.
Operation display
If the power switch is turned on
while the neutral brake switch is
on, an audible alarm will be heard.
Immediately set the neutral brake
switch to OFF.
F50/B50
F70/B30
Throttle Mode "THMOD"
-This function allows selection of the forward side and brake (reverse) side operation ra-
tio from 70:30 or 50:50 by changing the neutral position of the throttle servo.
When "CUT OFF", which provides trigger brake side operation in the boat mode (page
78), was set, the neutral brake function cannot be used because brake operation is
stopped. In addition, the neutral position does not change even though the throttle mode
is changed.
When "TRG-BRK" was set to "CUT OFF" by boat mode function
Setup items
NT-BRK : Neutral Brake
MODE : Foward side / Brake side
Forward side
Brake side
Throttle Mode "THMOD"
(Throttle system)
Forward side
Brake side