Sending a fax – Brother Fax-410M User Manual

Page 68

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

IV-2. SENDING A FAX

2. SENDING A FAX

There are two methods of sending a fax transmission - automatic
and manual.

Automatic

transmission

START

To transmit a document automatically, set the document face down
in the document feeder. The following screen appears;

F A X

E N T E R F A X N 0 .

C O P Y

P R E SS C O P Y K E Y

Dial the fax number of the destination using one-touch, speed dial,

Telephone Index, or manual dialing. Then, press the START key.

The document is read through the machine automatically.

On successful completion of transmission, the machine will beep.
If the transmission verification is "ON", then you will get a report
at the end of each transmission.

t h e telephone connection was not

STircessfiib

and auto redial was

set to "on", the machine will try to send again automatically. (See

page IV-1-10.)

the auto redial was set to "off", the transmission

will fail.

If the transmission was not successful then, the unit will print out
a Transmission Verification Report (error) automatically. If the

distant end is busy or there is no response the LCD will read either
"NO RESPONSE OR BUSY", and the unit will print out a
transmission verification Report (busy) automatically.

TRANSMISSION VERIFICATION REPORT

TIME ;

: 06/01/1991 14:18

NAME ;

: B R O T H E R

FAX ; : 052-811-5981

TEL ;

: 0 5 2 - 8 2 4 - 2 5 5 4

DATE.TIME

FAX NO-/NAME

DURATION

PAGE (S)

RESULT

MODE

06/01 14:16

HEAD QTR.

00:01:33

01 COVERPAGE

ERROR

FINE

C A L L B A C K M S G .

lV-2-1

This manual is related to the following products:

Fax-500M