To start the self-clean cycle, Instructions, Press – Kenmore 790.99019 User Manual
Page 28: Display, When the self-clean cycle has completed, Stopping or interrupting a self-cieaning cycie, Preparing for the self-clean cycle, Iilbilfe, Oven cleaning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Start the Self-Clean Cycle
The
CLEAN
(c™) pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean
cycle remennber to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour.
So to self-clean for 3 hours will actually take about 4 hours to complete.
*lt is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for
heavy soils {to assure satisfactory results).
Oven Cleaning
FEATURE OVERVIEW
• Starting the Self-Clean Cycle
WARNING
During the self-cleaning cycle, the outside of the range can become very hot to the touch.
DO NOT
leave
small children unattended near the appliance; they may be burned If they touch the hot oven door surfaces.
i^CAUTION
DO NOT
force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY HOT.
INSTRUCTIONS
PRESS
DISPLAY
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically:
1. Be sure the clock is set with the correct time of day and the
oven door is closed.
2. Press .
"CLEAN"
will flash and
"3:00"
will show in the
display {Fig. 1). The control will automatically clean for a 3 hour
period {default self-cleaning cycle time). Note: if a 2 or 4 hour
clean time is desired, press
CD
for 2 hour or press
CD
for a 4 hour clean time. Set the cleaning time based on the
amount of soil; light, medium or heavy {*See above).
3. Press
The
"DOOR LOCKED"
icon will flash;
"CLEAN"
icon and the letters "CLn" will remain on in the display {Fig. 2).
4. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the
"DOOR LOCKED"
indicator light will stop flashing
and remain on. Also, the oven Icon will appear In the display
{See Fig. 3).
Note: Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle has Completed:
1. The time of day, the
"DOOR LOCKED"
and
"CLEAN"
icon will
remain in the display {Fig. 4).
2. Once the oven has cooled down for approximately 1 HOUR, and
the
"DOOR LOCKED"
icon is no longer displayed, the oven
door can then be opened {Fig. 5).
( T ) o r ( ^
or(T)
Figure 2
iilBilfe
DOQR WCKEP Cl£Alt
Figure 3
Figure 4
Figure 5
Stopping or Interrupting a Self-Cieaning Cycie:
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1
.
Press
2. Once the oven has cooled down for approximately 1 HOUR and
the
"DOOR LOCKED"
icon is no longer displayed.the oven door
can then be opened {Fig. 5).
28