Consumer defined control features, Feature, Overview – Kenmore 790.99019 User Manual
Page 19: Setting silent control operation, Instructions, Press, Display, Silent control operation, Feature overview
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Consumer
Defined Control
Features
FEATURE
OVERVIEW
• Silent Control
Operation
TIMES OVEN
:MCO<
T!ME
□vEs^eooK
S
top
T
íme
K
itchen
Tl№E№
ÜM/ÜFF
START
CLOCK
C
lean
GVEN
L
ight
üw
O
ff
BA«
BROIL H^T
M
eats
C
akes
B
reads
FOOD CATEQORIES
7
B
8
0
.Cl:EAR^
O
ff
Setting Silent Control Operation
The
STOP TIME (g) and CLEAN (a™) pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the controi can be
programmed for silent operation and later returned to operating with a!! the norma! sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold
for 7 seconds.
"DELAY" will appear and flash
in the display (Fig. 1). if ":SP" appears {Fig. 2), the control will
operate with normal sounds and beeps. I f a p p e a r s (Fig.3),
the control is in the silent operation mode.
2. Press (e™) to switch between normal sound operation and
silent operation mode. The display will show either ":SP" (Fig. 2)
or":-"(Fig. 3).
PRESS
4.
Press to accept the change or press to reject the
or
change.
DISPLAY
i':;'-::
r*
mm/:
"X.
^ )for7seconds
Figure 1
Figure 2
Figure 3
19