Important safety instructions, Read ail instructions before using this appliance, A warning – Kenmore 790.7050 User Manual
Page 3: Save these instructions for future reference, Important, Safety instructions -6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
important Safety instructions
Read ail instructions before using this appliance.
This manual contains important safety symbols and
instructions. Please pay attention to these symbols and
follow all instructions given.
Definitions
^^This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Do not attempt to install or operate your appliance until
you have read the safety precautions in this manual. Safety
items throughout this manual are labeled with a WARNING
or CAUTION statement based on the risk type.
A WARNING
- indicates a potentially hazardous
situation y/hich, if not avoided, may result in death or
serious injury.
ii CAUTION
- indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
ii WARNING
If
the
information in this manual is not
followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
FOR YOUR SAFETY:
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
— WHAT TO DO IF YOU SMELL GAS:
*
Do not try to light any appliance.
*
Do not touch any electrical switch; do not use
any phone in your building.
*
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
*
If you cannot reach your gas supplier, call the
fire department.
— Installation and service must be performed by
a
qualified installer, servicer or the gas supplier.
Remove all tape and packaging before using the range.
Destroy the carton and plastic bags after unpacking the
range. Never allow children to play with packaging
material.
Proper Installation—Be sure your appliance is properly
installed and grounded by a qualified technician in
accordance with the National Fuel Gas Code ANSI
Z223.- latest edition, or in Canada CAN/CGA B149.1,
and CAN/CGA B149.2, and the National Electrical Code
ANSI/NFPA No.70-latest edition, or in Canada CSA
Standard C22.1, Canadian Electrical Code, Part 1, and
local code requirements. Install only per installation
instructions provided in the literature package for this
range. Ask your dealer to recommend
a qualified
technician and an authorized repair service. Know how to
disconnect the power to the range at the circuit breaker
or fuse box in case of an emergency.
User servicing—Do not repair or replace any part of the
appliance unless specifically recommended in the
manuals. All other servicing should be done only by a
qualified technician. This may reduce the risk of personal
injury and damage to the range.
A WARNING
• All ranges can tip.
•
Injury to persons could result.
•
Install anti-tip device packed with
range.
• See Installation Instructions.
To reduce the risk of tipping, the range
must be secured by properly installed
anti-tip
bracket
provided
with
the
range. To check if the bracket is installed
properly,
visually
check
that
rear
leveling leg is inserted into and fully
secured
by
the
anti-tip
bracket
by
removing lower front panel or storage
drawer from the range.
For models equipped with a warmer drawer or lower oven,
grasp the top rear edge of the range and carefully attempt
to tilt it forward. Refer to the installation instructions for
proper anti- tip bracket installation.
• Never modify or alter the construction of
a
range by
removing the leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the range.
• Remove the oven door from any unused range if it is to
be stored or discarded.
Save these instructions for future reference.