Installation — desk or table top – GE 2-9235 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION — DESK OR TABLE TOP
The Pulse/Tone Switch
The PULSE/TONE switch located on the
BASE should be set to the proper position.
The switch should be set to TONE if you
have “touch tone” service. Otherwise, set to
PULSE.
Note: If you have pulse service, the switch
may be changed to TONE after dialing is
completed. This allows access to phone
services that require a tone. Return switch to
PULSE when call is completed.
4. Ringer Volume
The RINGER VOLUME switch located on the
side of the BASE can be set to the following:
HI — Maximum Volume
LO — Lower Volume
OFF — Ringer is not heard