AquaCraft SuperVee 27 Nitro - Manual (Page 3)

3
• Model engines generate considerable heat. Do not touch
any part of your engine until it has cooled. Touching the
muffl er, cylinder head, or exhaust header may result in
a serious burn.
• Use safety glasses when starting or running engines. The
propeller may throw loose material such as sand or
gravel into your face.
• NEVER attempt to swim after a stalled or capsized boat.
Wait patiently for the wind currents to return the boat
to shore or use a tennis ball attached to the end of a
fi shing rod to retrieve a stalled or capsized boat.
• NEVER operate your boat while standing in the water.
• ALWAYS wear a personal fl otation device when boarding
and operating any retrieval craft.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the
place of purchase.
USEFUL TOOLBOX ITEMS
As with any hobby, it is a good idea to assemble a useful
collection of tools and accessories to bring along anytime
you head out to the pond. Here are some items you will want
to keep handy.
❏
Metric and standard hex drivers
❏
10mm Open end wrench
❏
12mm Open end wrench
❏
Hobby knife (HCAR0109)
❏
Long nose pliers
❏
Glow plug wrench (DTXR1170)
❏
Engine tuning screwdriver (DTXR1170)
❏
Spare glow plugs (DTXG3001)
❏
Fuel tubing (GPMQ4131)
❏
After Run ™ engine oil (HCAP3000)
❏
Extra “AA” batteries
❏
AquaCraft GrimRacer ™ Speed Grease cable
lubricant (AQUB9500)
OTHER USEFUL TOOLBOX ITEMS
❏
Paper towels
❏
Spray-on glass cleaner
❏
Sunglasses
❏
Sun block
❏
Waders or rubber boots
❏
Cooler with plenty of cold water and soda
❏
Folding table
❏
Lawn chairs
❏
First-aid kit
❏
Canopy for shelter
BOAT TERMINOLOGY
BOW: The front of the boat.
STERN: The back of the boat.
PORT: This is the left side of the boat when aboard and
facing the front (bow).
STARBOARD: This is the right side of the boat when aboard
and facing the front (bow).
HULL: The body of the boat.
DECK: The top of the boat.
HATCH: Typically a removable top to access the inside of
the hull.
PREPARING YOUR BOAT FOR OPERATION
Carefully remove your SuperVee 27 Nitro boat and stand
from the box. You may wish to keep the box in order to
transport and store your SuperVee 27 Nitro.
Decals have been provided for your SuperVee 27 Nitro.
Simply cut them out, peel, and stick! See the photos on the
box for a decal placement example.
THE BOAT STAND
Your boat comes with a laser cut and engraved stand. It’s
pre-built with soft protective cradle strips to help keep your
boat scuff free.