AquaCraft King's Ransom - Manual (Page 8)

FINISHING THE RIGGING
❏
1. Cut a length of rigging string approx. 150cm (5 feet) long.
❏
2. Tie a loop in one end of the string.
❏
3. Position the loop over the cleat located on the lower
portion of the aft (rear) mast.
❏
4. Bring the string up and run it through the hole in the top
mast stand off.
❏
5. Loop the string through the hole in the top mast stand off
a second time and continue on to the center mast.
❏
6. Double loop the center mast stand off the same as you
did the first one.
❏
7. Continue on to the fore (front) mast and double loop it
as you did the last one. Finish by tying the string to the lower
portion of the fore mast.
8