Connecting tv, Cable system or vhf/uhf antenna system, High definition interface – AOC LC32W063 User Manual

Page 14: Hdmi connection, Component signal connection, Tuner, Hdmi in 1 / 2 / 3, Component in 1/2

Connecting TV

Cable System or Vhf/Uhf antenna System

You can enjoy standard-definition and high-definition digital programming (if available in your area), along with standard-definition analog

programming.
This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna.
It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm

twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation.

Cable or VHF/UHF(or VHF only)

75-ohm coaxial

cable (supplled)

Rear of TV

VHF/UHF input

TUNER

high definition Interface

You can enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the best

possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input on the back of your TV.

hdmI Connection

HDMI

HD Multimedia Interface

HDMI IN 1 / 2 / 3

If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI cable or adapter) jack and

connect the audio jack to the PC AUDIO IN jacks.

Component Signal Connection

Y Pb Pr

Component Video Input

Component IN 1/2

Audio