English, Wall-mount instruction – AOC LC27H060 User Manual

Page 11

Wall-mount instruction

Attaching The Optional Wall Mount Arm (not supplied)

Follow these steps to finish installing the wall mounting arm:

1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the

back of the monitor.

2. Insert the 4 screws into the holes and tighten.

Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

NOTE

200mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm, deep =10 mm screw mounting

kit not included.

Due to safety concerns, if the VESA mounting kit is purchased separately please make sure the

mounting kit is UL-Listed, and replaceable only by service personnel.

English