Acronova NB15-BR Series - Manual (Page 2)

User’s Manual, Nimbie NB15, ver. 9A2, Part #: 711-NB15-9AC6-1
Sleep Mode of Nimbie NB15
Nimbie NB15 is designed to work under the control of Nimbie Chorus
Master unit. If the sleep mode is enabled from the Master unit, it will enter
sleep mode when the system is idle after a certain period of time. The
Master unit will wake up the Client unit when the user presses any button
on the Master unit.
You may hot-plug NB15 onto the Nimbie Chorus System; the Master unit
will detect the newly connected Client unit automatically. You may unplug
any NB15 from the Master Unit when it is working. Refer to the user manual
of Nimbie Chorus Master unit for detailed information.
A PPENDIX
Tips for Handling Optical Discs
Never touch the printable or data surface of the disc, as it
may decrease quality and disc lifespan. Refer to the
arrows on the illustration to the right, always handle discs
from the outer edge or the center hole.
Important Tips for Loading Discs to Nimbie
When the disc loader is empty, do not attempt to load
many discs at once.
First, carefully load one disc into the disc loader and
assure it is firmly resting on the three wheels seen in the
illustration to the right. Then, gradually load additional
discs on top of the first one, until the loader is full.
Nimbie processes discs in a First In, First Out (FIFO)
sequence. During a duplication session, if a disc refill is
required, before the loader becomes empty, gently load additional discs.
Rejected Discs
Nimbie is designed to have Rejected Discs
come out underneath the unit. Do not block the
Reject Disc Slot.
Periodically remove rejected discs so that there
is room to accommodate more discs.
Important:
Nimbie will stop operation if rejected discs
jam the Reject Disc Slot.
More Than 30 Discs in One Session
Nimbie can process 100 or more discs
without refilling. To do this, follow the
instructions below:
1) Open the Blank Disc Storage Lid.
2) Remove the extension rods from
the lid's underside.
3) One after another insert the rods
into the three holes on the disc
loader, then, gently turn the rods
counterclockwise to make sure they
are firmly attached;
4) Use a suitable box to raise Nimbie
approximately 96 mm high to
account for the output of 100 or
more discs.
5) Use the alignment pad to
appropriately position the Finish Disc Bin below the Finish Disc Slot.
The Finish Disc Bin may be a spindle box or a container with enough depth
to accommodate 100 or more discs in a session.
Since Nimbie is equipped with a FIFO (First-In-First-Out) disc loader, you
may simply refill discs before the disc loader becomes empty. This will allow
an unlimited number of additional discs to be processed in one session, as
long as the Finish Disc Bin is continually emptied.
To remove the extension rods from the disc loader, turn the rods clockwise
and pull them upward vertically. When not using the rods, return them to
their original position on the lid's underside.
Nimbie Maintenance
Periodically cleaning the device will ensure proper performance. Follow the
steps below to maintain Nimbie:
Turn off the Nimbie Chorus System; the Nimbie Client unit will also be
powered off accordingly.
1) Remove all discs from the blank disc storage.
2) Clean the Nimbie unit using a lint-free cloth moistened with warm
water.
3) Dry the unit immediately with a dry lint-free cloth.
W ARRANTY
Limited Warranty (North America): The information contained in this
document is subject to change without notice. Acronova Technology Inc.
makes no warranty of any kind with respect to this information.
Acronova Technology Inc. guarantees this device for a period of one year
from the date of delivery, free from defects in material and workmanship.
In case of malfunction or fault, Acronova Technology Inc. will, at its option,
repair or replace the product.
You must return the defective product, protected in the original packaging,
with a valid RMA number, to an authorized dealer or reseller within the
warranty period accompanied with the proof of purchase.
This warranty only covers parts made by Acronova Technology Inc. For
parts made by other manufacturers, such as disc recorders, the original
manufacturer's warranty applies.
This warranty will not cover abuse, misuse, alteration, modification,
tampering, negligence, faulty installation, accidents, lack of reasonable care,
unauthorized repairs or service, or if installed to any device not provided
with the product, or if the serial number label provided with this product has
been broken or removed.
This warranty does not cover damages that occur in shipment, due to acts
of God. All repairs and replacement services shall only be handled by
Acronova Technology Inc, and by authorized service centers. Parts used
for replacement are covered only for the remainder of the warranty period.
Acronova Technology Inc. disclaims all implied warranties on this product,
including without limitation warranties of merchantability, performance, and
fitness for a particular purpose.
In no event will Acronova Technology Inc. be liable for direct, indirect,
special, incidental, tort, economic, contingent or consequential damages
resulting from any defect in this product or its documentation, including,
without, limitation, damages or costs relating to the loss of data, profits,
business or goodwill, even if Acronova Technology Inc., its authorized
dealers or resellers have advertised the possibilities of such damages. In
no case shall Acronova Technology Inc.'s liability exceed the amount paid
by the user of this product out of which such claim arose.
Any written or oral information or advice given by the dealer, reseller, agent,
sales representative, or employee of Acronova Technology Inc. will in no
way increase the scope of this warranty nor should you rely on such oral or
written communication.
FCC R EGULATIONS
This equipment has been tested and founded to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If
this equipment is not installed and used according to the instructions, it may
cause damaging to the radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which
the receiver is located.
Consult your dealer or an experienced radio/TV technician.
Any changes or modifications to this device that are not expressly approved
could void the user's authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class A
limits of Part 15 of FCC rules.
S PECIFICATIONS
Disc Recorder One CD/DVD recorder (NB15);
One Blu-ray/CD/DVD recorder (NB15-BR)
Input Capacity: 30 discs; 100 discs or more using extension rods
(increased capacity using non-stop refill)
Output Capacity: Dependent capacity (completed discs are placed in front
of the unit, in a separate container, or Disc Storage Bin)
Reject Disc: 3 discs without legs; 30 discs using legs
Write Speed: CD-R: 40X; CD-RW: 32X; DVD±R: 18X; DVD±R Dual:
10X; DVD-RW: 6X; DVD+RW: 8X;
(NB15-BR: Blu-ray: 4X or higher)
Control Panel: LED Status Indicators
Disc Size: 120 mm in diameter
Operation: Temperature: 42℉ to 86℉ (6℃ to 30℃)
Humidity: 5% to 85%, no condensation
Certification: CE and FCC
Dimensions: 7-3/4" x 8-1/2" x 15-3/8"; 19.5 x 21.3 x 39 cm
Weight: 2.7 kg; 6 lbs (varies upon configuration)
Power: Supplied from the Nimbie Chorus Master unit (NBCH07)
using the NimbieCable
*Specifications are subject to change without notice.
For technical support and assistance, firstly contact your local dealer. For additional
information regarding optical disc duplication, printing, and management please visit our
website at http://www.acronova.com. We value your comments and suggestions and thank you
for purchasing our products
©2009, Acronova Technology Inc. All rights reserved. Reproduction, adaptation, or translation
of this material without prior written permission is prohibited. Acronova, Nimbie, and
NimbieCable are the trademarks of Acronova Technology Inc. All other products, brands, and
trademarks are the property of their respective owners.