Unpacking, Supplied accessories, Description – Panasonic FV-08VK3 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UNPACKING
Unpack and carefully remove the unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
SUPPLIED ACCESSORIES
Part name
Grille
Suspension
bracket I
Suspension
bracket II
Suspension
bracket III
Suspension
bracket IV
Appearance
For models of:
FV-13VKM3
FV-08VKM3
For models of:
FV-13VKS3
FV-08VKS3
FV-13VK3
FV-08VK3
FV-05VK3
Quantity
Part name
Appearance
Quantity
Screw I
(ST4.2X6)
2
Screw II
(ST4.2X14)
1
Long screw
(ST4.2X20)
6
Installation
instructions
2
Warranty
sheet
1
DESCRIPTION
These Panasonic ventilating fan models are listed by UL under UL file No. E78414.
These Panasonic ventilating fan models use a sirocco fan driven by a DC motor powered by an integral
transformer. The motor is designed to have long operating life, high dynamic response, higher speed ranges
with saving energy. The grille covering the fan body is a spring-loaded, quick remove type.
A damper for preventing air counter flow is provided.
The blower uses a high-capacity sirocco fan developed to reduce the noise level.
Panasonic ventilating fan models FV-13VKM3 and FV-08VKM3 are equipped with a motion sensor that
shifts the fan to high flow automatically when motion is detected. It is user-adjustable to operate
0.5~60 minutes after motion is no longer detected.