Installation e (suspension brackets mounting), Joist situation, Suspension bracket connect method – Panasonic FV-08VK3 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION E (SUSPENSION BRACKETS MOUNTING)
Joist situation:
Spacing A is 16 inches
(406 mm) to 24 inches
(609 mm) on center joists
1. If the spacing A is 16 inches (406 mm) to 24 inches
(609 mm) on center joists, please follow the
installation step as below.
2. Insert the suspension bracket I and II into the fan
body and suspension bracket III or IV into the
adaptor. (Select the suspension bracket connection
holes as shown below) (Fig.9, Fig.10)
Suspension bracket connect method:
Suspension bracket I and ii connect with
screw I as shown below:
Unit: inches (mm)
Suspension
bracket II '
13
1/4-15
1/2(336-394)
161/2
-18
3/4(419-480)
21 1/4 -23 1/2 (540-597)
„
^
Suspension
Screw
I
bracket
I
(ST4.2X6)
3. Install the suspension bracket to joists by using long
screws (ST4.2X20) (Fig. 10) and secure it to the fan
body by using screw n (ST4.2X14). (Fig.11)
4. Follow steps 4 to 10 of installation i
(page
8
and page 9) to complete the
installation work.
Suspension bracket in
16 inches (406 mm) or
19 inches (483 mm) horizentai joist
Suspension bracket IV
24 inches (609 mm) horizentai joist
Joists
6 Long screws
(ST4.2X20)
131/4-151/2 ( 336-394)
161/2-19
3/4(419-480)
21 1/4-23 1/2(540-597)
Sensor unit
(FV-13VKM3 &
FV-08VKM3 oniy)
I
21/2-4
1/5
(64-107)
51/2-7 1/5 (140-183)
"--------- 1
T
b
0-1 (0-25.4)
I
Unit: inches (mm)
Fig. 10
10