Panasonic FV-08VKME3 - Manual (Page 10)

INSTALLATION I (JOIST MOUNTING -1) CONTINUED
10. Adjust High/Low delay time preset switch and
Low speed air volume preset switch.(Fig.8)
Refer to switch indication on page 7.
11. Insert the other mounting spring into the slot as
shown and mount grille to fan body. (Fig.9)
A
caution
O
Mount grille carefully so that lead wire of
sensor unit and lighting unit is not pinched.
INSTALLATION E (SUSPENSION BRACKETS MOUNTING)
Joist situation:
|4—
A
Spacing A is 16 inches
if if
(406 mm) to 24 inches Joists
'k
(609 mm) on center joists
'
1. If the spacing A is 16 inches (406 mm) to 24 inches
(609 mm) on center joists, please follow the
installation step as below.
2. Insert the suspension bracket i and n into the fan
body and suspension bracket HI or IV into the
adaptor. (Select the suspension bracket connection
holes as shown below) (Fig. 10, Fig.11)
Suspension bracket connect method:
Suspension bracket i and II connect with
screw I as shown below:
Unit: inches (mm)
Suspension
bracket n
15 1/2 (336-394)
18 3/4(419-480)
23 1/2 ( 540 - 597 )
, Suspension
Screw I bracket I
(ST4.2X6)
3. Install the suspension bracket to joists by using long
screws (ST4.2X20) (Fig.11) and secure it to the fan
body by using screw II (ST4.2X14).(Fig.12)
page 10) to complete the installation work.
1 0