Inovonics ACC640 - Manual

ACC640
Enclosure
ACC640
Enclosure
Product Description: The ACC640 Enclosure allows most Inovonics receivers and
indoor repeaters to be mounted in an outdoor enclosure. The enclosure also
accommodates an optional backup battery.
Product Description: The ACC640 Enclosure allows most Inovonics receivers and
indoor repeaters to be mounted in an outdoor enclosure. The enclosure also
accommodates an optional backup battery.
Installation
1)The enclosure can be mounted with
screws inserted in the mounting
holes or tabs.
2)Flex the receiver clip slightly to
insert the receiver / repeater.
3)Flex the battery clip slightly when
inserting a battery.
Installation
1) The enclosure can be mounted
with screws inserted in the
mounting holes or tabs.
2) Flex the receiver clip slightly to
insert the receiver / repeater.
3) Flex the battery clip slightly when
inserting a battery.
Wiring
1)Wiring into the receiver / repeater
should be routed through the
oval knockout in the receiver /
repeater base.
2)Wiring from the ACC640 should be
routed through a hole drilled at
the Drill Target location.
Wiring
1) Wiring into the receiver / repeater
should be routed through the
oval knockout in the receiver /
repeater base.
2) Wiring from the ACC640 should
be routed through a hole drilled
at the Drill Target location.
Inovonics Technical Service—800.782. 2709— 303.939.9336
www.inovonics.com
Inovonics Technical Service—800.782. 2709— 303.939.9336
www.inovonics.com
Installation Instructions 02862E Installation Instructions 02862E
Absorbent Pack
To help maintain a quality
environment for the electronics,
DO NOT REMOVE the absorbent
pack. Place the enclosure cover with
the absorbent pack positioned over
the electronics.
Absorbent Pack
To help maintain a quality
environment for the electronics,
DO NOT REMOVE the absorbent
pack. Place the enclosure cover with
the absorbent pack positioned over
the electronics.
© 2009 Inovonics Wireless Corporation © 2009 Inovonics Wireless Corporation
Do Not Remove Do Not Remove Do Not Remove Do Not Remove
IWC PN 03376A IWC PN 03376A IWC PN 03376A IWC PN 03376A
Battery
(Optional)
Battery
(Optional)
Battery (Optional) Battery (Optional)
Wiring to external devices
via drilled hole.
Wiring to external devices
via drilled hole.
Receiver Installed Receiver Installed
Drill Target Drill Target
Enclosure Back Enclosure Back
Mounting Holes (4 places) Mounting Holes (4 places)
Mounting Tabs (2 places) Mounting Tabs (2 places)
Clips Installed Clips Installed