Inovonics EE1243 - Manual (Page 3)

5.21.14 06598A © Inovonics, 2014 - www.inovonics.com 3
Note: The base will not fit properly if the batteries are not installed.
10. Reattach the sensor to the mounting base.
11. Perform the sensitivity test.
5 US Patent Numbers
• 7,154,866
• 7,554,932
• 7,746,804
• Other patents pending
6 Specifications
Sensor dimensions: Detector: 14.2cm x 6.1cm (5.4” x 2.4”) Base: 13.7cm x
1.17cm (5.4 in. x 0.46 in.)
Install temperature: -0°C to 38°C (32°F to 100°F)
Humidity: 10% to 90% non-condensing
Battery: 2 3V-Lithium batteries. Panasonic CR123A is recommended.
Transmitter frequency range: 868-869 MHz
Average alarm current: 120mA
Average standby current: 35µA
Typical test current: 2mA Low Battery
Chirp rate: 1 every 45 ± 2 sec
Note: Specifications and data are subject to change without notice.
Caution: Changes or modifications to this unit not expressly approved by
Inovonics may void the installer's authority to operate the equipment as
well as the product warranty.