Bio Bidet BLISS Premier Class Bidet Seat - Manual (Page 9)

Installation Manual and Operating Instructions 16 17
5 Operation (Details)
NOZZLE CLEANING (Automatically)
This product has an automatic nozzle self-cleaning function that
cleans the nozzle before and after each use.
Auto Wash
- If the “MASSAGE” ( , ) function selected when user is not using wash functions,
it automatically operates wash and dry function sequentially.
- Wash (30 Seconds) + Dryer (1minute) then automatically stops
NOZZLE CLEANING (Manual)
Nozzle can be cleaned manually by pressing “Posterior Wash”( / ) button for 3 seconds
without being occupied on the seat and nozzle will come out without spraying water. After cleaning
the nozzle, Press “Stop”( / ) button to return nozzle to stand-by mode.
( , : in Simple Operation panel -Remote Model)
Nozzle Shower
- If the “MOVE” ( , ) button is selected without sitting on the seat,
it operates nozzle shower function.
- Water flows automatically to nozzle and nozzle moves for about 20 seconds
to wash entire nozzle and then it automatically retracts.
When using the Posterior Wash or Feminine Wash functions, pressing the “MASSAGE” ( , )
button will provide a pulsation spray.
You may change the pressure of the spray by pressing the “High”( ) button or “Low”( ) buttons.
Push the “MASSAGE”( , ) button again and the pulsating action will stop automatically.
Auto-Setting of Massage Feature
You can set this function to automatically pulsate whenever the seat is occupied and the Posterior
or Feminine washes are in operation.
Step 1: Sit on this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on this product and proceed with Posterior or Feminine Wash.
Note: In the automatic setting, you may still adjust the pressure of the pulsating spray by
pressing the “high”( ) or “low”( ) functions.
Canceling the Automatic Oscillation function
Step 1: Sit on this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a double Chime.
MASSAGE (Rhythm Wash) ECONOMY (Energy Save Mode)
- Keep seat cover closed when not in use to prevent heat from being lost.
- Keep temperature set to low.
- Unplug the power cord if you do not plan to use the unit for a long period of time.
Saver On/ Off
- When pressing( , ) the energy saver LED on the main unit will turn on.
(press button again, the saver LED will turn off)
- Energy saver mode automatically maintains a water and
seat temperature of 89.6 (32 ).
- When using bidet in saver mode, it is turned to automatic saver.
- When you rise from the seat, it goes into saver mode.
- Seat temperature is maintained 32 .
Other energy saver tips
In order to save energy, please abide by the following instructions:
In energy saver mode, the seat heating temperature could appear to be
lower than the actual temperature setting.
OFF
State
ON
State
Flashing
State
OPERA
TION
OCCUPIED
SENSOR
ENERGY
SAVER
POWER
BB-2000
DEODORANT ENERGY
SAVER
POWER
BB-1700