Bio Bidet BLISS Premier Class Bidet Seat - Manual (Page 12)

MAINTENANCE FOR WINTER SEASON
When the “Posterior Wash ( / )” button is pressed
for 3 seconds without occupying the seat, the nozzle can be
cleaned with a soft toothbrush.
After cleaning the nozzle, push the “Stop ( / )”
button once again, and the nozzle retracts itself.
(
: in Simple Operation panel -Remote Model)
1) Close the water shut off valve.
2) Flush the toilet to empty the water reservoir.
3) Unscrew the water filter nut.
4) Clean the strainer with a small brush or water.
5) Re-screw the water filter nut.
6) Open the water shut off valve.
This product will not operate
properly if the strainer is clogged.
Please clean the strainer regularly.
( : in Simple Operation panel -Remote Model)
CLEANING THE NOZZLE DRAINING THE WARM WATER TANK IN THE UNIT
When you clean this product, do not use thinner, benzene or
toilet bowl cleaner. It may cause damage to the surface of unit.
Use a wet cloth when you clean this product.
Do not spray water directly on to this product.
When you clean this product, disconnect the power plug.
CLEANING THE BODY OF UNIT
CLEANING THE STRAINER
If you do not intend to use this product for 14 days or longer,
drain the water from this product’s warm water tank.
1) Disconnect the power plug.
2) Close the water shut off valve.
3) Press the drain lever until the water is
completely drained from water tank.
4) To re-supply water after draining,
open the water shut off valve.
Do not drink the drained water.
Do not insert finger into the drain hole.
Before draining, unplug the power cord and wait 30 minutes until the unit has cooled down.
Check the power cord if it is plugged in or not. 1
Keep the water temperature on “Middle or High Level” to prevent water from freezing.
2
If you do not intend to use the unit for 14 days or longer, disconnect the power
plug and drain the water. 3
Installation Manual and Operating Instructions 22 23
8 Maintenance 9 Water Draining
MAINTENANCE
BB-2000
BB-1700