Stopping scan, Note, Pausing playback (pause) – Yamaha San Diego CD32 User Manual
Page 15: Displaying the time, Setting the clock, Selecting 12/24-hour clock mode, Cd changer mode clock - time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD CHANGER MODE
CLOCK - TIME
stopping SCAN
To stop scanning,
O briefly press the
2 (SCAN)
button
0
again.
The currently scanned track will then
continue to be played normally.
Note:
• You can set the scanning time
(scantime). For further details, read
the section entitled “Setting the
scantime” in the “CD mode”
chapter.
Pausing playback (PAUSE)
o Press button
1 (ll^)
0.
“S--PAUSE” appears in the display.
Canceling pause
O Press button
2 (ll^)
0
while in
pause mode.
Playback is resumed.
CLOCK - Time
Displaying the time
To display the time,
o
briefly press the © button
0.
Setting the clock
o Press the
MENU
button
0.
o Keep pressing the A or button
0
until “CLOCKSET” appears in
the display.
o
Press the > button
0.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
o Adjust the minutes using the A /Y
buttons
0
.
Once the minutes are set,
o press the < button
0
.
The hours flash on and off.
O Adjust the hours using the A/ V
buttons
0
.
When you have finished making your
changes,
O press the
MENU
button
0
twice.
Selecting 12/24-hour clock
mode
O Press the
MENU
button
0.
O Keep pressing the A or V button
0
until “24 H MODE” or “12 H
MODE” appears in the display.
o
Press the
<
or
>
button
0
to
switch between the modes.
9BLAUPUNKT-
15