Panasonic AG-DTL1P - Manual (Page 82)

RS-232C
I Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC Data returned from unit in response Description of command
[STX] LTY;n:t:abcdefgh [ETX]
Parameter
n = 1—6: Recording type
(RT1—6)
t = 0: 3-hour recording
1: 9'hour recording
2: 12-hour recording
3: 18-hour recording
4: 24-hour recording
5: 48-hour recording
6: 72-hour recording
7; 96-hour recording
8: 120-hour recording
9: 180-hour recording
A: 240-hour recording
B: 360-hour recording
C: 480-hour recording
D: 960-hour recording
F: OFF (setting of TiME
MODE button is compiled
with)
a = Y or N; for setting cameras
No.1 and 2
b = Y or N: for setting cameras
No.3 and 4
c = Y or N: for setting cameras
No.5 and 6
d = Y or N: for setting cameras
No.7 and 8
e = Y or N: for setting cameras
No. 9 and 10
f = Y or N: for setting cameras
No.11 and 12
a = Y or N: for setting cameras
No.l3 and 14
h = Y or N; for setting cameras
No.15 and 16
Y: Used
N: Not used
[SIX] LTY [ETX] Sets the combination of the recording time mode and
number of cameras.
[STX] LUl:data [ETX]
Parameter
data = U7U6U5U4U7U3U2U1U0
An ASCII code is used to set the
user ID to be written onto the tape.
Binary 4BITx8
♦
ASCII code: 0—9, A—F
[STX] LUl [ETX] Sets the user ID (max, 8 alphanumerics).
By setting the user ID, it will be recorded onto the recording
tape.
The following 16 alphanumerics can be used.
0, 1. 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D. E, F
[STX] LWB:m [ETX]
Parameter
m= N: Buzzer ON
F: Buzzer OFF
[STX] LWB [ETX] Sets whether the buzzer is to sound when a problem occurs
in the unit and the power is automatically turned off.
82