Wilbur Curtis Airpot Rack Assembly - Manual (Page 2)

Attaching Label Holders
Label holders can be attached to the airpot rack in two places:
On the tall sign hanger that inserts into
the back side of the airpot rack.
On the front of the rack.
Hooking Racks Together
LABEL HOLDER ON
TALL SIGN HANGER
LABEL HOLDER ON
FRONT OF RACK
4/0 9 F-3262 rev E
Attaching the Legs
Attaching the Sign Hanger
INSERT BOTH ENDS
OF HANGER INTO
HOLES ON FRAME
HANGER GOES IN
ONE WAY ONLY
SPREAD AND ATTACH
BRACE TO LEGS
1 2
2
1 2
Place Drip Tray
3
LEGS INSTALLED
1
HOLD RACK UP, HOOK LEGS
ON FRAME (2nd BAR FROM
END ON 2-WIDE RACKS, 3rd
BAR FROM END ON 3-WIDE
RACKS), LEGS POINT
FORWARD
4/28/9 . 16.0 . ECN 10396 . rev E