Allen&Heath ZED POWER - Manual (Page 24)

Allen & Heath 24 ZED POWER 1000
ZED EFFECTS PROCESSOR
Effects Type List & Description:
There are 16 different effects presets in the ZED Effects Processor. Each is fed with a mono
signal from the FX bus, and the output from the effects processor is in stereo.
Each preset has a parameter adjust control which is matched to the preset. This control may
morph several parameters all at once, for example the parameter control for the Chorus effect
will adjust not only the depth, but the response of the filters in software to create a more or less
intense effect. In general, when adjusting the effect parameter, the more LED’s that are illumi-
nated, the more intense the effect or higher the parameter value.
To restore the parameter settings to the factory defaults, hold down both SEL buttons whilst
switching on the power to your ZED.
Effect Preset Name Effect Description & Parameter adjustment.
1 Dly+verb(level) Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = 70mS Max = 1.35S, PARAMETER adjusts the level of reverb.
2 Dly+verb(size) Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = Min = 70mS Max = 1.35S, PARAMETER adjusts the size of reverb.
3 Dly+verb(regen) Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = 70mS Max = 1.35S, PARAMETER adjusts the regeneration of the
delay.
4 PingPong(regen) Ping Pong delay (left then right) in parallel with Plate reverb. TAP for left
delay time Min = 70mS Max = 1.35S, PARAMETER adjusts the delay regen-
eration.
5 BeatDly(regen) As (4) but right delay is set for 1/4 beat of left. Good for off beat 4/4 delay
sound. TAP for left delay time & PARAMETER adjusts the delay regenera-
tion.
6 Ambient(echo) Echo Delay with Reverb. PARAMETER adjusts the echo time.
7 SlapVerb(size) Reverb with echo reflections creating classic slapback reverb sound.
PARAMETER adjusts the slapback size (more slap echo).
8 DoubleZED(size) Classic stereo doubler.
PARAMETER adjusts delay and size.
9 Plate(decay) Classic plate reverb. PARAMETER adjusts decay time.
10 Plate(predly) Plate reverb with pre-delay. Good for vocals/percussion.
PARAMETER adjusts pre-delay time (for increased intelligibility).
11 Plate(colour) Classic plate reverb. PARAMETER adjusts tonal texture from dark to bright.
12 Hall1(size) Smooth classic hall reverb. PARAMETER adjusts size of hall.
13 Hall2(size) Brighter hall reverb. PARAMETER adjusts size of hall.
14 Arena(size) Arena reverb. PARAMETER adjusts size of arena.
15 Flanger(dpth) Classic flanger effect. PARAMETER adjusts depth and tonality.
16 Chorus(dpth) Chorus effect. PARAMETER adjusts depth and tonality.