AZZA Triton 401 - Manual (Page 9)

7
6_2.5” SSD & HD Device Installation
7_Top Fans Installation
8_Close The Side Panel
1.Take off the 2.5” device holder from 3.5” device.
2.Your 2.5” device can be screwed into this holder. All together you may have two 2.5”
devices lock onto the same holder.
3.Secured the 2.5” device with screws, then put this 2.5” device holder
back to 3.5” HD holder and secured it with screws.
4.Push the 3.5” HD holder back to HD cage.
1.Put the 2.5” device on the 3.5” HD holder.
2.Secured the 2.5” device with screw.
3.Push the 3.5” HD holder back to HD cage.
Option 1:
Option 2:
Place the fans beneath the top panel and screw the fans from outside the case.
Closed the side panel along with those screws that we’ve remove from.
* This holder can put two 2.5’’ SDD devices.