AZZA Triton 401 - Manual (Page 7)

5
INSTALLATION INSTRUCTION
1_Open The Side Panel
2_Remove The Front Panel and Top Panel
3_Install Power Supply
1.Remove the locking screws towards the back of the case on the left-hand-side.
2.Slide out the side panel.
1.Hold the front panel by placing one hand on top of the case and one hand at the
bottom.
2.Pull the bottom part front panel towards you.
1.Place the power supply towards the bottom of the case.
2.Tighten the power supply with screw.
3.This case is designed in a way that the power supply unit can be installed either facing
up or down.