Craftsman 137.212370 - Manual (Page 6)

ACCESSORIES AND ATTAGH!\/IENTS FORASSE
RECOMMENDED ACCESSORIES
A WARNING
• Use only accessories recommended for this
miter saw. Follow instructions that accompany
accessories. Use of improper accessories may
cause hazards.
m The use of any cutting tool except 10 inch saw
blades which meet the requirements under
recommended accessories is prohibited. Do
not use accessories such as shaper cutters or
dado sets. Ferrous metal cutting and the use of
abrasive wheels is prohibited.
« Do not attempt to modify this tool or create
accessories not recommended for use with
this too!. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious injury.
ACCESSORIES
Visit your Sears Hardware Department or see the
Sears Power and Hand Tool Catalog to purchase
recommended accessories for this power tool.
A WARNING
To avoid the risk of personal injury, do not modify this
power too! or use accessories not recommended by
Sears.
A
WARNING
Read warnings and conditions on your CARBIDE TIPPED
SAW BLADE. Do not operate the saw without the proper
saw blade guard in place. Carbide is a very hard but
brittle material. Care should be taken while mounting,
using and storing carbide tipped blades to prevent
accidental damage. Slight shocks, such as striking the
tip while handling, can seriously damage the blade.
Foreign objects in the workpiece, such as wire or nails,
can also cause tips to crack or break off. Before using,
always visually examine the blade and tips for bent
blade, cracks, breakage, missing or loose tips, or other
damage. Do not use if damage is suspected. Failure
to heed safety instructions and warnings can result in
serious bodily injury.
Supplied
(or=
Not supplied
D
Blade Wrench Adjustable Wrench
Hex Key
i Q
Combination Square
Phillips Screwdriver
Slotted Screwdriver
COMBINATION SQUARE MUST BE TRUE
Should not gap or overlap when square is flipped over
(see dotted figure).
Straight edge or
a 3/4 in. board,
Draw light line on board this edge must be
along this edge. perfectly straight.
when flipped over.