Know your brushcutter attachment, Blade, Operating the coupler – Craftsman C944.511591 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT.
Compare
the
illustrations with your
unit
to familiar
ize yourself with the location of various controis and adjustments. Save this
manual for future reference.
Hanger
BLADE
The BLADE is designed for cutting grass,
weeds, and brush up to 1/2 inch (1 cm)
in diameter.
Blade
The
BLADE SHIELD
provides protection
from the spinning blade.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach
ments to be installed. The optional at
tachments are:
Edger.............................71-51157
Cultivator....................... 71-51158
Blower........................... 71-51160
Pruner .......................... 71-51161
^WARNING; Always disconnect
powerhead spark plug before remov
ing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal
ling attachments, place the powerhead
and attachment on a flat surface for
stability.
1. Loosen the coupler by turning the
knob counterclockwise.