Sony SLV-750HF - Manual (Page 30)

Playback
Playing Back Externally-Recorded Tapes
When playing back a cassette recorded on another VCR, the
tracking condition is automatically adjusted. You can also
adjust the tracking condition and the sharpness manually
according to the following instructions.
•Q) ID ^ e s
‘0) '
iD *(D'
Ó a C)
^ CD ______________ AUDIO MONITOR
TRACKING
Automatic tracking adjustment
The tracking condition is automatically adjusted on this VCR.
The AUTO TRACKING indicator flashes while the VCR is
searching for the optimal tracking condition and lights when
optimum playback picture is obtained. The automatic
tracking control is activated in the following conditions:
• When the cassette is inserted for the first time
• When the recording mode on the playback cassette is
switched from SP to EP and back again
• When the picture is distorted by scratches on the cassette
• When the AUTO TRACKING indicator is turned on by
pressing TRACKING AUTO/MANUAL after the picture is
adjusted manually
NOTES:
• Auto tracking adjustment is not possible for cassettes
recorded in LP mode.
• Auto tracking adjustment may be impossible and the
tracking indicator may not appear on the TV screen
when the recording condition of the cassette is poor.
• During auto tracking adjustment, streaks or noise
may occur.
Selecting the Monitor Sound
You can play back cassettes on which stereo sound or
bilingual programs are recorded.
Press AUDIO MONITOR to select the desired sound mode.
Each press of the button changes the display on the TV screen.
Manual tracking adjustment
When the playback picture has streaks and/or snow during
normal playback, adjust the picture manually with
TRACKING NORMAL/SLOW and STILL ADJUST
T/A.
Press either
a
or
t
for the best possible picture. The tracking
meter will appear on the TV screen and the AUTO
TRACKING indicator will turn off.
NOTE:
When you play back a cassette recorded in monaural,
the sound is heard in monaural regardless of the setting
of the AUDIO MONITOR.
Sound Mode
stereo
Indicator On-screen
Display
Sound heard
Stereo tape Bilingual tape
Lights up STEREO Stereo
Left and right
channels
Lights up L ch Left channel Left channel
Lights up RcM Right channel Right channel
No
indication None Monaural on normal
audio track Sound on normal
audio track (SAP)
30 Basic Operations