Sony TC-WE825S - Manual (Page 7)

asic Operations
*Q* To protect recordings
against accidental erasure
Break out the record-protect
tab(s) (see page 18).
*9' The Dolby HX PRO*
system automatically
works during recording
Distortion and noise in the
high-frequency response are
reduced to produce high-
quality sound that can be
enjoyed even during
playback on other tape decks.
HX Pro headroom extension
originated by Bang & Olufsen
and manufactured under license
from Dolby Laboratories
Licensing Corporation.
"DOLBY", the double-D symbol
□□ and "HX PRO" are
trademarks of Dolby
Laboratories Licensing
Corporation.
^ Press PAUSE II or O.
Recording starts.
Start playing the program source.
To Press
Stop recording ■
Start recording from the reverse side <3 twice in Step 5
Pause PAUSE II. Press the button again to
resume recording.
Take out the cassette = after stopping recording
Use these switches (controls) to perform additional
operations
To record with the Dolby NR system
Set DOLBY NR to ON, and select B, C, or S (TC-WE825S only) before you start
recording.
To record FM broadcasts with the Dolby NR system
If the FM reception is unsatisfactory, set DOLBY NR to ON FILTER (multiplex
filter) (see page 22).
To adjust the recording level manually
After pressing REC • in Step 4 on page 6, turri
REC LEVEL so that the peak level meters reach
the recommended level for the corresponding
tape type. After completing the adjustments,
stop playing the program source, then continue
the procedure from Step 5.
For type I or____
type II tape
For type IV tape
W