Sony KW-34HD1 - Manual (Page 45)

Using the DTV Menus
Using the Channel Setup Menu
To select the Channel Setup Menu
1 Press MENU.
-
2 Select I
To restore the factory default settings for Channel Setup options
□ Press RESET on the remote control while the Channel Setup Menu is
displayed.
Selecting Channel
Setup Options The Chamrel Setup menu includes the following options:
Option Description
Auto Program Automatically programs the TV to receive channels for each
input source, including cable, VHF/UHF, and digital.
^ You must use Auto Program on initial setup (page 11) of your DTV system
in order to receive any channels.
Cable: Select to scan and preset cable channels automatically.
VHF/UHF: Select to scan and preset VFIF/UFIF/Digital channels
automatically.
During the Auto Program process, AUTO PROGRAM appears
and the TV starts scanning and presetting channels automatically.
When all the receivable channels are stored, the lowest numbered
channel is displayed.
DTV Auto Add Select to preset additional digital channels as they become
available (after you use Auto Program).
Channel Select to remove or add channels from the channel list for each
Show/Hide input source.