Listening with the cordless stereo headphones, Setting up the headphones, Install the supplied battery into the headphones – Sony KV-32XBR45 User Manual

Page 26: Using the headphones, 2 turn on the headphones, To turn off the sound from the tv's speaker, To improve sound reception, Press c (headphones)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Listening with the

cordless stereo
headphones

Setting up the headphones

Install the supplied battery into the
headphones.

(1) Open the battery compartment lid by pressing on

the lid as illustrated.

(2) Insert the size AA (R6) battery into the

compartment with correct polarity and close the lid.

Battery life

When used continuously, the battery will last:
— up to 40 hours with size AA (R6) alkaline batteries or
— up to 20 hours with size AA (R6) manganese batteries.

Replace the battery with a new one when the sound deteriorates.

Using the headphones

2

Turn on the headphones.

Turn the power on by adjusting the switch to ON.
Adjust the volume with the switch located below
the power switch.

If you want to only listen to the sound from the
cordless headphones, turn down the TV speaker
volume or press MUTING.

To turn off the sound from the TV's speaker

Press VOL - until the sound disappears, or set
SPEAKER to CENTER (see "Setting the speakers," page

24).

To turn off the headphones

Remove the headphones from your head, and turn the
power switch to OFF, then press

Cl

(headphones).

To improve sound reception

• Do not cover the infrared transmitter on the TV.
• Do not cover the infrared sensors on the headphones.

Infrared transmitter

MODE

Low position

Press

C

(headphones).

The

C

display appears for about three seconds.

Selected channel number

c

26 Operations

Notes
• The sound characteristics heard through the headphones

cannot be modified in the same manner as the sound
characteristics heard through the TV's speakers.
Treble, bass and balance settings are fixed. Surround, OSE and
muting features are not available.

• After you have finished listening with the headphones, it is

recommended that you remove the headphones from your
head before pressing U (headphones). Otherwise noise will be
heard through the headphones.

• To prevent hearing damage due to sudden or prolonged

excessive volume, do not set the headphones' volume too high
while listening.