Sony DA V-HDX5OO - Manual (Page 93)

■ [DISTANCE (SURROUND)]
The dclaiilt distance selling for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 24), the settings is automatically
displayed.
Be sure to change the value in the Setup Display
when ymi move the speakers.
[L/R]
3.00 m/10 SiiiTound speaker distance
Toin the listening position can
(appears when yon p y pp
set [SURROUND! to ,i,eters*t (0 to 2.f ft).
[YES] in the
[CONNECTION]
setting.)
^'When yon perform the Quick Seinp (page 24), the
default settings are chtinged.
“kt.OO to 7-01 meters for North American models.
^kd.04 m/IO ft for North Amorictin inodcls.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker disitinee setting is not in the
recommended range, At /Ai ** m is displayed
being the number). At indicates over the
recommended disitinee. A1 intlieales below.
■ [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
Set this between -
+6.0 dB.
-6.0 dB and
[SUBWOOFER]
+2.0 dB Set this between -6.0 dB anti
+6.0 dB.
■ [LEVEL (SURROUND)]
You can vary tlie level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
(appears when you
set [.SURROUND]
to [YES] in the
ICONNECTION]
setting.)
Set this between -6.0 dB and
+6.0 dB.
[L/R]
0.0 dB Set this between -6.0 dB and
+6.0 dB.
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on Ihe unit, or press
VOLUME +/- on the remote.
■ [TEST TONE]
The speakers will emit a test lone to adjusl
[LEVEL (FRONT)l and ¡LEVEL
(.SURROUND)].
[OFF] The lest tone is not emitted from the
speakers.
[ON] The test lone is emitted from each speaker
in seqiienee while adjusting level. When
you select one of the [SPEAKER SETUP!
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press СЭ DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press Ф/Ф to select Si [SETUP],
then press 0.
The options lor [SETUP] appear.
>
a
<
аз
3
о
(D
a
(Л
5'
CO
CA
&3
3
a
>
&
c'
»
3
(D
3
continued
93^5