About dvd software types and the conversion method – Sony DA V-HDX5OO User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Press VIDEO FORMAT.
The cyrrcnt signal appears in the front panel display.
Each time you press VIDEO EORMAT. the display changes as follows:
C
NORMAL (INTERLACE)
i
PROGRESSIVE
■ NORMAL (INTERLACE)
Select this setting when:
- your TV docs not accept progressive signals, or,
- your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (MONITOR
OUT (VIDEO/S VIDEO)).
■ PROGRESSIVE
Select this setting when:
- your TV accepts progressive signals, and,
- the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions arc not met.
• When you connect the unit and the TV with the HDMI cord during ihe system is set to ''NORMAL
(INTERLACE).” the
system is set to
“PROGRESSIVE"
automatically.
m
• When you connect tlic unit and the TV with the HDMI cord, VIDEO FORMAT is used for selecting the type of
video signals ontpul from Ihe HDMI OUT jack. For details, see "To select the type of video signal output from the
HDMI OUT (high-definition multimedia interface out) jack" (page 31).
About DVD software types and the conversion method
DVD software ctni be divided into 2 types; I'ilm-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms. and displays ¡mages at 30
l'ramcs/60 fields per second. Film-based software is derived from film and displays images at 24 frames
per second. Some DVD software contains both video and film.
In order for these images to appear iiatLiral on your screen wiien output in progressive format, the
progressive signals need to be converted to match the type of DVD software tliat you are watching.
•
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT V|[)EO OUT jacks. Even though
you set to "PROGRESSIVES images from the MONITOR OUT ( VIDEO or S VIDEO) jack are unaffected as they
arc otUpiir in the interltice format.
0
3
3
CQ
(g
fid
a
1
>
I
z
o
m
0
1
33^^®