Canon BJC-3000 - Manual (Page 55)

55 Printing on Paper and Other Media
Using Transparencies
3
Load the transparencies as follows.
(a) With the print side facing up, place, one sheet of A4 or Letter size paper
under the stack. Load the stack with the edges aligned against the right
side of the auto sheet feeder.
(b) Slide the paper guide to the left side of the stack until it is snug. You
can print on either side of transparencies, but using a slightly curled
surface as a print side is recommended.
• You can load up to 30 transparencies in the auto sheet feeder.
• When the auto sheet feeder feeds two or more transparencies at a time,
lower the paper rest as shown in the figure.
Print side
(a)
(b)
Plain paper
Print side
Note