Canon BJC-3000 - Manual (Page 312)

312 Troubleshooting - Avoiding Problems
Setting Colour Adjustment
In the printer driver, you can adjust the colour tones of the image by chang-
ing the density of each colour (cyan, magenta, yellow and black).
For example, you can lower the magenta setting when the reds are too
strong or raise the cyan setting when the blues are too weak.
To adjust the colour balance, follow the procedure below.
1
Open the Printer Properties dialogue box, and click the Advanced button in
the Main tab.
2
Click the Colour tab.
3
Move the slide bars of the individual colours to the left or right (or click the
arrows on each end of the slide bars).
If Colour Adjustment is greyed out and cannot be used, check Colour
Adjustment in the checkbox.
Windows
Note