SONiVOX Big Bang Cinematic Percussion - Manual (Page 21)

21
Automation
Many of Big Bang Cinematic Percussion's parameters can be automated inside your DAW.
This section has a few tips about automating those parameters. If you haven't used automation
in your tracks before, though, consult your DAW's reference manual for specific instructions on
automating plug-in parameters.
When automating parameters, select the desired parameter from the list of Big Bang Cinematic
Percussion's automation parameters and either draw the automation in with your mouse or use
a hardware controller to record it. When you start playback, you will see the parameters change
in the interface in real time.
You can automate the following parameters:
Filter
Frequency Master Volume
Filter Q (resonance) Master Pan
Filter Envelope Velocity Note Repeat resolution (for each pad)
Filter Envelope Depth All Delay parameters (except sync values)
Filter Envelope parameters All EQ parameters
Amp Pan
Amp Volume
Amp Pitch
Amp Envelope Velocity
Amp Envelope parameters
Tip: If you have a hardware controller that sends MIDI continuous control (CC) messages, you
can assign them to control your effects' parameters in real time. Simply assign these knobs to a
CC, and record automation as you would any other parameter. (See the MIDI Learn section for
more information.) It's common to use a combination of recording and drawing the automation
in your DAW to get a good feel or to edit things after you've recorded them.