Hudson Robotics LabLinx - Manual (Page 17)

StackLink User Manual Hudson Robotics, Inc.
13

NOTE: Be sure to match the correct instrument nest name from the pull down
menu or errors will occur when attempting to run methods.

HINT: Clicking on the Test Button will allow you to test the operation of LabLinx
by allowing you to dispense, return, and shift plates.
Setting Up Plate Parameters
Entering correct dimensions for the plates you will be using is used only for the proper
handling of those plates by the PlateCrane EX as it automatically adjusts its positions for
each different plate-type used in every method based solely on the information entered
into that plate’s definition.
While not running a method, the user may click on the ‘Plates’ button located just above
the first configured instrument panel on SoftLinx’ ‘Run’ screen. The following ‘Plate
Setup’ form will be displayed:
Figure 13