BE Pressure supply 6800 Watt Generator BE6800HER - Manual (Page 30)

30
maintenance
1. Check the fuel (gasoline), engine oil and air cleaner.
2. Start engine.
3. With appliance such as lighting activated, run the engine for over ten
minutes.
4. Check the following items:
• Engine running properly.
• Adequate output and the indicator lamp turned on properly.
• Then engine switch normally operated.
• No leakage of engine oil and fuel (gasoline).
Transporting
When transporting the generator, make sure that the fuel (gasoline)
should be drained from the tank.
WARNING
To prevent fuel spillage due to the vibration and impact,
never transport the generator with fuel (gasoline) in the
tank. Secure the tank cap.
To avoid the risk of the gasoline flammability, never leave
the generator in an area exposed to direct sunlight or
high temperatures for a long period time.
Keep the fuel in the steel storage tank when transporting.
1. Turn the engine switch to the STOP position.
2. Drain the fuel from the tank.
3. Tighten the tank cap.
CAUTION
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the transport
vehicle so that the generator will not move or fall down. Secure the
generator with ropes if necessary.
transporting