BE Pressure supply 6800 Watt Generator BE6800HER - Manual (Page 22)

22
Using Electric Power
AC Application
1. Make sure the voltage indicated on the voltmeter is at the normal level
(approx. 120V).
2. Turn off the switch(es) of the electrical applianc(es) before connecting
to the generator.
3. Insert the plug(s) of the electrical appliance(s) into the receptacle.
• Be sure that the total wattage of all connected appliances does
not exceed the rated output of the generator.
operation
WARNING
Risk of electrocution.
Make sure that the appliance is switched of before
connecting it to the generator.
• DO NOT move the generator while it is running.
• Be sure to ground the generator. Failure to ground unit may lead to
electrical shock.
WARNING
To take power out from the twistlock receptacle, insert
the plug into the receptacle, and turn it clockwise to the
lock position.
• Be sure to ground the generator if the connected electrical device is
grounded.
• DO NOT put foreign objects into the plug receptacle.
NOTICE
This generator is thoroughly tested and adjusted in the factory. If the
generator does not produce the specified voltage, consult your nearest
authorized dealer.
4. Turn on the switch of the appliance.