Baseline Systems X-Series Pedestal User Manual
Baseline x-series pedestal installation guide, Materials and tools, X-series pedestal
Table of contents
Document Outline
- X-Series Pedestal
- The X-series pedestal units are designed to be mounted on a concrete pad and hold a Baseline controller in an X cabinet.
- Mount the Pedestal Base to the Concrete Pad
- Mount the Pedestal to the Base
- Position the pedestal over the base and lower it into place, making sure that the holes for the screws are aligned.
- Insert the 6 screws and securely tighten the nuts.
- Attach the Controller Mounting Bracket to the Pedestal
- Align the tabs on the controller mounting bracket with the slots in the top of the pedestal, and then slide the mounting bracket into place.
- Insert the 5 screws and securely tighten the nuts.
- Thread the small screw into the hole at the top of the mounting bracket and tighten it part way.
- Mount the Controller to the Pedestal